ROVA BRAND ASSETS
=================
Version 2, 2026-09-18.

These files are free to use when you are referring to Rova, listing us as a partner, or
putting us on your artwork. Questions, or anything this kit does not cover:
https://rovasocial.com/support


THE ONE RULE THAT MATTERS
-------------------------
WHEN IN DOUBT, USE THE BADGE (rova-badge-v2-*.png).

The badge carries its own brand-black background and gold keyline, so it holds together on
any artwork, photo or colour. It is the only file that cannot fail against a background we
do not control. Reach for a bare, transparent mark only when you know exactly what is
behind it.


WHAT THE MARK IS, AND WHY THESE ARE RASTER FILES
------------------------------------------------
The Rova mark is a glossy three-dimensional letterform: a sculpted gold bowl over a dark
body, with layered gradients and specular highlights. It is not a flat shape with an
outline, and it is not a two-colour drawing.

Because of that, we supply it as HIGH-RESOLUTION RASTER (PNG), not as vector. A vector
trace of a rendered 3D object cannot carry gradients and highlights; it flattens the mark
into solid patches and stops looking like the logo. We would rather give you an honest PNG
than a vector that misrepresents the brand.

THE ONE EXCEPTION: the white and black knockouts are single-colour silhouettes, so a
curve-fitted outline IS a faithful representation of them. Those two, and only those two,
also ship as SVG and are genuinely scalable to any size.


MAXIMUM USABLE SIZE  (please read before sending anything to print)
-------------------------------------------------------------------
The mark's master artwork holds 622 x 597 pixels of real detail. That is a hard ceiling:
everything in this kit is produced from it, and no file can contain more detail than the
master has.

What that means in practice, at 300 dpi:

  Bare mark   honest up to about  53 mm / 2.1 in wide
  Badge       honest up to about 228 mm / 9.0 in wide

The files named "-print" are supplied at exactly that ceiling with a 300 dpi tag, so they
are 1:1 with the master and contain no upscaling at all. Hand a printer one of those.

  rova-mark-*-v2-print.png    833 x 833 px    300 dpi   (mark is 622 px = 52.7 mm)
  rova-badge-v2-print.png    2688 x 896 px    300 dpi   (228 mm wide)

One disclosure, so nobody is surprised: in the 1024 px mark PNGs the mark is placed at
764 px wide, which is 1.23x the master's 622 px of real detail. It is resampled up with a
Lanczos filter, not invented, and it is the largest mark PNG we ship. Every other file in
the kit sits at or below the master's native detail.

NEED IT BIGGER? Ask us. We can re-render the mark from the 3D source at whatever size you
need, which is a genuinely better file than anything you can make by enlarging these.
Please do not upscale a PNG yourself, and please do not screenshot the logo off the website.


WHICH FILE DO I USE?
--------------------
Unsure, or placing on someone's artwork ........ rova-badge-v2
Dark background, above 64 px ................... rova-mark-dark-v2
Light background, above 64 px .................. rova-mark-light-v2
Under about 64 px: favicons, app rows, strips .. rova-mark-solid-v2
One colour only: print, engraving, stamps ...... rova-mark-white-v2 / rova-mark-black-v2

  rova-badge-v2       The mark and the Rova wordmark on the brand-black tile with a gold
                      keyline. Brings its own background. THE DEFAULT HAND-OUT.

  rova-mark-dark-v2   The bare mark with its gold glow, transparent background, for DARK
                      backgrounds. The glow is not decoration: the mark has a dark body, so
                      without it the letter sinks into black and navy and only a gold
                      crescent survives. Do not remove it.

  rova-mark-light-v2  The bare mark retuned for LIGHT backgrounds, with the gold deepened
                      by a hue-preserving lightness curve. Measured against #ffffff, EVERY
                      pixel of the mark clears 3.00:1, and the mark's area-weighted average
                      is 12.0:1. The stock gold is 1.61:1 on white and is illegible there.

  rova-mark-white-v2  Solid white, one colour, no gradient. Dark or busy backgrounds, and
                      one-colour print. Also supplied as SVG.

  rova-mark-black-v2  Solid black, one colour, no gradient. Light backgrounds, faxes,
                      stamps, engraving, one-colour print. Also supplied as SVG.

  rova-mark-solid-v2  The R as one solid gold silhouette. Use this below about 64 px. At
                      small sizes the gold edge and the gloss on the normal mark fall below
                      the rendering threshold and the letter goes muddy; this one does not.
                      It also survives a busy photograph better than any other bare mark.


MINIMUM SIZES
-------------
  Badge ............................ 120 px wide absolute floor, 160 px or more recommended.
                                     Below 120 px the wordmark closes up.
  Mark, dark or light .............. 64 px. Below that the gold edge thins out and the glow
                                     swallows the letter.
  Solid mark, white and black ...... 24 px.
  In print ......................... badge no smaller than 30 mm wide, bare mark no smaller
                                     than 16 mm.


CLEAR SPACE
-----------
Leave clear space on all four sides equal to 0.17 x the height of the mark (the height of
the R's counter, the enclosed hole in the bowl). For the badge, 0.10 x the badge height.
Nothing goes inside that margin: no text, no rules, no other logos, no edge of the page.

The supplied files already carry about 1.9x that margin inside the artwork, so placing a
file as supplied keeps you inside the rule. Measure from the visible edge of the R only if
you crop it tight.


COLOURS
-------
  Brand black      #0d0c09
  Gold ramp        #120e07 -> #9f6b0b -> #fddb44 -> #fdffbc   (the mark's own gold, measured)
  Deep gold        #080400 -> #603700 -> #997400 -> #92923d   (rova-mark-light-v2)
  Wordmark gold    #a9760a -> #f5c518 -> #ffe89a -> #f5c518
  Brand gold       #f5c518   (the glow, the badge keyline, the solid mark)

One-colour uses are #ffffff or #000000 only. There is no other approved one-colour version.


PLEASE DON'T
------------
  Recolour the mark, or rebuild it in your own colours.
  Stretch, squash, rotate, tilt or skew it.
  Add a glow, shadow, outline, bevel or any other effect. The dark mark's glow is already
    baked into the file; do not add a second one.
  Put a transparent mark on busy or light artwork. Use the badge.
  Re-typeset the wordmark, or set other words to match it.
  Place the mark inside another shape.
  Upscale a PNG, or screenshot the logo off the website. Take the file, or ask us.


FILE LIST
---------
  rova-badge-v2-600.png            600 x 200
  rova-badge-v2-1200.png          1200 x 400
  rova-badge-v2-1800.png          1800 x 600
  rova-badge-v2-print.png         2688 x 896    300 dpi

  rova-mark-dark-v2-256.png        256 x 256
  rova-mark-dark-v2-512.png        512 x 512
  rova-mark-dark-v2-1024.png      1024 x 1024
  rova-mark-dark-v2-print.png      833 x 833    300 dpi

  rova-mark-light-v2-*.png        256 / 512 / 1024 square, plus -print 833 x 833 at 300 dpi
  rova-mark-white-v2-*.png        256 / 512 / 1024 square, plus -print 833 x 833 at 300 dpi
  rova-mark-black-v2-*.png        256 / 512 / 1024 square, plus -print 833 x 833 at 300 dpi
  rova-mark-solid-v2-*.png        256 / 512 / 1024 square, plus -print 833 x 833 at 300 dpi

  rova-mark-white-v2.svg          vector, single colour
  rova-mark-black-v2.svg          vector, single colour

All PNGs are RGBA with a transparent background, except the badge, whose tile is opaque
inside its rounded corners. The "-print" files carry a 300 dpi pHYs tag.
